Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.
Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light.
The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 30 percent, an LED street light is considered to be at the end of its life.
Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the backside of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment.
Overview
Super High-Performance Price Ratio
Higher efficacy LED by Lumileds, Bridgelux, or San’an chip. China's famous driver brands SOSEN, INVENTRONICS, and ZHIHE. More convenient for installation and maintenance.
Multiple Configurations Optional
10KV SPD is optional. the Glass cover is optional.
Photocell, timer dimming, DALI, 0-10V dimming is optional.
An intelligent control system with 7 PIN NEMA interface is optional.
| | GY3614LD | GY4719LD | GY5623LD | GY6729LD | GY7433LD |
| Power(W) | 20-30 | 30-60 | 80-100 | 120-150 | 180-280 |
| Lumen Output(lm) | 2400-3600 | 3600-7200 | 9600-12000 | 14400-18000 | 21600-33600 |
| Input Voltage(V) | 100-240/277VAC |
| Power Factor | 0.95 |
| Frequency(Hz) | 50-60 |
| Lighting Efficiency(LM/W) | 110-130 | 120-140 |
| Lamp Post Diameter(mm) | 40 | 60 |
| CRI | 70 |
| Color Temperature(K) | 2700-6500 |
| Certificates | CE-LVD IK09, IP67 | NO |
| Material | Die casting aluminum+PC lens |
| Beam Angle | II-M | I-S, II-M, III-M, V | I-S, II-M, III-M, V | I-S, II-M, III-M, V | I-S, II-M, III-M, V |
| Glass Grade | I | I | I | I | I |
| IP Grade | IP67 |
| IK Grade | IK09 |
| Optional Function | No | Glass outside or 10KV SPT or Light sensor(3P/7P)
or 40mm adapter |
Photocell
UL/TUV certificated Switch on when illuminance <6 LUX Switch off when illuminance >50LUX
3 Pin/5 Pin/7Pin
LED Driver
High-quality drivers provide excellent stability, a long lifetime, and the best working performance.
Surge Protector Device
10K 5KA high-quality Surge Protector Device, can avoid the loss by thunderstrike or surge effectively. (20KV 10KA is optional.)
Glass is Optional
Glass cover is optional
Convenient Maintenance
Tool-Free Open and Maintenance
You can open the power supply cavity by rotating the butterfly screw with your fingers. The design of anti dropping screws is safer.
PC material lens
PC material lens has high transmittance and low light attenuation. Compared with a glass lens, it is not easy to damage.
Protection level IP65
Silica gel ring core sealing technology is used to achieve waterproof and dust-proof, which is suitable for outdoor harsh environment.
Fin Heat Dissipation Technology
Efficient aluminum fin heat dissipation technology, the surface using powder baking process, fashion appearance, excellent
corrosion resistance.
Attention before installation:
•Please carefully read the operating instructions before using the products.
•Please check if the power supply meets the requirements. The input voltage of products is AC 85-300V
•Please cut off the power supply before installation.
Packaging & Delivery
•Packaging Details
•5 years warranty new module heatsink IP66 IK08 protect parking lot lighting shoebox led street light
1 Put into a Carton box with standard export packing
2 Also according to your need.
